Project of“Development and Application of Compound High-precision Coordinate Measuring Instruments”with Accuracy near 0.3μm
On September 24, 2016, TZTEK held a new product launch in Suzhou and announced that it had achieved a major breakthrough in the project of “Development and Application of Compound High-precision Coordinate Measuring Instruments” in the “Special National Major Scientific Instruments and Equipment Development Project”. Its accuracy is close to the target of 0.3μm, marking a success of the major independent innovation in the field of China instrumentation, and meaning that China has become the third country in the world after Germany and Japan to master the same high-precision coordinate measurement technology.In recent years, China's precision measuring instrument industry has developed rapidly, but high-precision precision measuring instruments still need to be imported. Although domestic universities and research institutes have made great achievements in scientific research on high-precision measuring instruments, compared with developed countries, the core technology of the instrument industry is weak, and the market share and added value are low. During the "12th Five-Year Plan" period, the Ministry of Science and Technology launched the "National Special Scientific Instruments Development Project", emphasizing on market-oriented, application-oriented, and industrial-oriented, and supporting the development of major scientific instruments and equipment with market promotion prospects, including precision optical instruments and systems, which enables domestic companies to develop and promote more efficiently and rapidly.TZTEK is a science and technology enterprise dedicated to the development of ultra-high-precision measurement instruments for sub-micron scale. The "Compound High-precision Coordinate Measuring Instrument Development and Application" project led by it was selected as a national major scientific instrument and equipment development project in 2013. The project was initiated by TZTEK, and jointly participated by the National Institute of Metrology, China,Tianjin University, Beijing University of Technology, Aviation Industry Corporation of China, Ltd., Beijing Institute of Aeronautical Materials, Academy of Opto-electronics, Chinese Academy of Sciences, Chengdu Tool Research Institute Co., Ltd., and other universities and research institutions, aiming to develop a compound high-precision coordinate measuring instrument that has reached the international advanced level in China, with a measurement precision of up to 0.3 μm.The Project of “Development and Application of Composite High-precision Coordinate Measurement Instrument” has achieved major breakthroughs and innovations in the key technical fields of the ultra-precision three-axis motion platform and the high-precision composite detection system, and has initially realized 5-axis space measurement. The positioning accuracy of the machine reaches sub-micron level. Breakthroughs have also been achieved in the field of multi-probe calibration and data fusion, and 21-item error compensation. The accuracy of the instrument has approached the final target of 0.3 μm. Synchronous with technology R&D, the project has also carried out several studies on specific measurement methods for the fields of materials engineering, tool manufacturing, and precision measurement. Since the project was developed, it has applied for 20 invention patents, published 7 papers, and applied for 3 software copyrights.TZTEK, always rooted in modern industry, intelligent industry, and future industrial fields, attaches great importance to innovation, and undertakes multiple science and technology projects at or above the provincial level. From the image measurement instrument to automation industry technology, TZTEK has always been committed to providing industrial automatic and intelligent products and solutions for precision manufacturing, promoting the development of high-precision measurement technology and serving customers relying on its leading capacity in technology R&D .
TZTEK''s Dr. Xu Yihua Was Selected as A Leading Talent of “Ten Thousand People Plan”
On June 20, 2016, according to the Announcement on Publicizing the Second Batch of National Leading Talents for the “Ten Thousand People Plan”. TZTEK Chairman Xu Yihua was selected as the national leader in the “Ten Thousand People Plan”. And in Suzhou High-Tech District, there are only two people won this award. The National Special Support Program for High-level Talents, referred to as the “National Special Support Program”, also known as the “Ten Thousand People Plan”, is a support plan for high-level talents at home. The Plan covers a wide area, involves many departments, and has a long implementation period. Approved by the Central Government, and jointly launched by 11 ministries and commissions including the Central Organization Department and the Ministry of Human Resources and Social Sciences, it will provide special support for selected 10,000 outstanding talents, leading talents and young talents from the fields of natural sciences, engineering technology, and philosophy and social sciences to form a system for the development of domestic high-level innovative and entrepreneurial talents that complements and integrates with the overseas high-level talents program. The "Ten Thousand People Plan" emphasizes on providing key support for key talents and special training for special talents. It is a talent support plan with a high "gold content". On the basis of the original support of the relevant departments, the state will provide "key support funds" that are roughly equivalent to those of the National "Thousand-people Plan" experts for the key targets selected by the Plan, and award them the title of "National Special Support Talents."
Industry Standard - Flash-measuring Image Measurement Instrument Initiated by Suzhou TZTEK Is Approved by the Ministry of Industry and Information Technology
Recently, the industry standard JB/T 12639-2016 Flash-measuring Image Measurement Instrument initiated by TZTEK Technology Co., Ltd., and jointly drafted by Chengdu Tool Research Institute Co., Ltd., National Institute of Metrology, China, Jiangsu Institute of Metrology, and Tianjin University has been approved by the Ministry of Industry and Information Technology, and will be published in 2016. The approval of this standard is yet another breakthrough for TZTEK as a drafting and calibrating unit for image equipment. With the rapid development of smart manufacturing, more and more companies have put forward higher requirements for manufacturing efficiency and workpiece quality. To improve the detection efficiency, TZTEK has incorporated the innovative concept of flash measurement based on multiple advanced technologies in the field of image measurement, and developed VMQ series of image measurement instrument to realize fast measurement with only one key, thus greatly improving the measurement efficiency and satisfying the user''''s requirements for high-efficiency detection. The launch of the flash-measuring image measurement instrument products make up the gap of flash measurement technology in the precision measurement industry. The ratification of the JB/T 12639-2016 Flash-measuring Image Measurement Instrument Standards marks that the company''''s technology has once again been recognized by the national authorities, which fully demonstrates that TZTEK has reached a new height in the industry''''s development prospects and product technology content, and has maintained a leading position in the industry. TZTEK, established in 2005, is engaged in building a well-known high-end brand in Chinese intelligent industry, providing industrial automatic and intelligent products and solutions for precision manufacturing customers. Its precision measurement instruments are the only high-end brands independently researched and developed in China and have been ranking first in the industry for many years. It is understood that TZTEK has been investing in the three fields of precision measurement technology, machine vision technology, and industrial automation technology for many years, and currently, has applied for more than 50 national patents and 8 software monographs. It has won many awards such as "National High-tech Enterprise", "National Torch Plan", "Jiangsu Province Science and Technology Progress Award", and also drafted and formulated several national and industrial standards along with related organizations. In the future, TZTEK will develop more products that are internationally competitive and contribute to China''''s manufacturing of 2025 relying on years of technical accumulation in the fields of precision measurement and intelligent industry.
CCMT2016 - Forever Industrial Age
On April 11-15, 2016, the 9th China CNC Machine Tools Expo (CCMT2016) was grandly opened at Shanghai New International Expo Center. As a leading brand of precision measurement in China, TZTEK introduced 4 classic bestselling models and provided professional technical explanations, perfect solutions and thoughtful measurement experience to clients at the exhibition site.(TZTEK booth surrounded by crowds)Vision Measurement Leader Increasing attention is paid to product details by users as the intelligent production is replacing artificial production day by day, and even a nuance of micron matters to user experience. TZTEK VMU series of high-end image measuring instrument, with a measuring accuracy of 1.5 micrometers, meets high measurement standards of customers and improves the production efficiency and market competitiveness of enterprises. “Big” Is Visible Although it may not arouse much praise if speaking of “big size” in life, the measurement of “big size” never ceases. TZTEK VMU gantry-type image measurement instrument has perfectly solved lots of measurement efficiency and accuracy issues in PCB, LCD, sheet metal, aerospace and other industries and provided a wide range of large-stroke measurement cases to demonstrate its performance advantages in multiple aspects and the ability to save costs for customers while improving production efficiency. Cute & Powerful For mass and small-size or single and multi-size workpieces, the VMQ flash image measurement instrument can easily solve measurement problems with one key. It integrates an innovative measurement concept of fast flash measurement, to realize a perfect match of software and hardware and ensure optimal measurement speed and data reliability. Additionally, plenty of external interfaces are also configured so that the equipment can be customized and integrated on various production lines for fast online measurement. More Efficient Measurement Convenient, simple, and easy to use, are the best interpretation of the VMA HM image measurement instrument that is based on the excellent hardware and software technology for auto image instrument of TZTEK, equipped with manual image measurement software, combined with powerful report output and data processing functions, to make the measurement on small-batch and multi-type workpieces much easier and efficient(Solving measurement difficulties for customers)The progress of industry promotes the improvement of productivity, and the innovation of science follows the pace of the times. With the end of CCMT, a new journey has quietly begun. The Chongqing Lijia International Machinery Exhibition on May 11-15, 2016 will bring back a visual feast and TZTEK will cause a sensation again!